Skip Navigation LinksHOME > PRODUCTS > LOUDSPEAKER

       Skip Navigation Links.
MORELLO-1

MORELLO-1
The Morello-1 loudspeaker is a full range transducer intended for medium to large listening salons. The output capability is large thanks to the twin, long throw woofers. When properly setup, the reproduced sound are accurate both in terms of timbre and non linear distortion.

Features
High output capacity
Very low distortion
Accurate timbre
Easy load for power amplifiers
Wide frequency response


Design
Each woofer operates in its own reflex loaded cavity; the Helmholtz resonance frequency is set to 22 Hz. The midrange driver operates in a heavily damped, closed cavity. The advanced crossover networks are refined during extensive laboratory work, measurements and listening sessions.

Enclosure
The Enclosure is made from veneered MDF board and braced to reduce cabinet resonances. The twin bass reflex ports are located on the rear side.

MORELLO-1 Brochure
Technical specifications

Frequency response:
20 Hz-30 kHz (+/- 3dB)

Cross over frequencies:
400 Hz and 2 kHz

Driver complement:
1x 1” Soft dome tweeter
1x 6.7” Polypropylene Midrange
2x 8” Alloy Woofers

Sensitivity:
89 dB SPL per 2,83 volts, 1 meter
Impedance:
8 ohms nominal (3,5 ohms minimum)

Connections:
4 mm binding posts

Weight and dimensions:
240 mm x 950 mm x 500 mm (WxHxD)
35 kg




O&G ENGINEERING
Enstavägen 12 - 187 35 TÄBY - SWEDEN
+46 (0)70 797 68 41/+46 (0)70 716 94 03
www.og-engineering.se